Last updated: Fri, 06 Nov 2009

ldap_search

(PHP 4, PHP 5)

ldap_search — Search LDAP tree

Description

resource ldap_search ( resource $link_identifier , string $base_dn , string $filter [, array $attributes [, int $attrsonly [, int $sizelimit [, int $timelimit [, int $deref ]]]]] )

Performs the search for a specified filter on the directory with the scope of LDAP_SCOPE_SUBTREE. This is equivalent to searching the entire directory.

From 4.0.5 on it's also possible to do parallel searches. To do this you use an array of link identifiers, rather than a single identifier, as the first argument. If you don't want the same base DN and the same filter for all the searches, you can also use an array of base DNs and/or an array of filters. Those arrays must be of the same size as the link identifier array since the first entries of the arrays are used for one search, the second entries are used for another, and so on. When doing parallel searches an array of search result identifiers is returned, except in case of error, then the entry corresponding to the search will be FALSE. This is very much like the value normally returned, except that a result identifier is always returned when a search was made. There are some rare cases where the normal search returns FALSE while the parallel search returns an identifier.

Parameters

link_identifier

An LDAP link identifier, returned by ldap_connect().

base_dn

The base DN for the directory.

filter

The search filter can be simple or advanced, using boolean operators in the format described in the LDAP documentation (see the » Netscape Directory SDK for full information on filters).

attributes

An array of the required attributes, e.g. array("mail", "sn", "cn"). Note that the "dn" is always returned irrespective of which attributes types are requested.

Using this parameter is much more efficient than the default action (which is to return all attributes and their associated values). The use of this parameter should therefore be considered good practice.

attrsonly

Should be set to 1 if only attribute types are wanted. If set to 0 both attributes types and attribute values are fetched which is the default behaviour.

sizelimit

Enables you to limit the count of entries fetched. Setting this to 0 means no limit.

Note: This parameter can NOT override server-side preset sizelimit. You can set it lower though.
Some directory server hosts will be configured to return no more than a preset number of entries. If this occurs, the server will indicate that it has only returned a partial results set. This also occurs if you use this parameter to limit the count of fetched entries.

timelimit

Sets the number of seconds how long is spend on the search. Setting this to 0 means no limit.

Note: This parameter can NOT override server-side preset timelimit. You can set it lower though.

deref

Specifies how aliases should be handled during the search. It can be one of the following:

LDAP_DEREF_NEVER - (default) aliases are never dereferenced.
LDAP_DEREF_SEARCHING - aliases should be dereferenced during the search but not when locating the base object of the search.
LDAP_DEREF_FINDING - aliases should be dereferenced when locating the base object but not during the search.
LDAP_DEREF_ALWAYS - aliases should be dereferenced always.

Return Values

Returns a search result identifier or FALSE on error.

Changelog

Version	Description
4.0.5	Parallel searches support was added.
4.0.2	The `attrsonly` , `sizelimit` , `timelimit` and `deref` were added.

Examples

The example below retrieves the organizational unit, surname, given name and email address for all people in "My Company" where the surname or given name contains the substring $person. This example uses a boolean filter to tell the server to look for information in more than one attribute.

Example #1 LDAP search


<?php
// $ds is a valid link identifier for a directory server

// $person is all or part of a person's name, eg "Jo"

$dn = "o=My Company, c=US";
$filter="(|(sn=$person*)(givenname=$person*))";
$justthese = array("ou", "sn", "givenname", "mail");

$sr=ldap_search($ds, $dn, $filter, $justthese);

$info = ldap_get_entries($ds, $sr);

echo $info["count"]." entries returned\n";
?>

ldap_set_option

ldap_sasl_bind

Last updated: Fri, 06 Nov 2009

add a note User Contributed Notes
ldap_search

eugene at hutorny dot in dot ua
25-Oct-2009 06:35


This function accepts LDAP search results and return a flat table (2-d array) with search results.

<?php

/*

 * This function returns flat table out of search results

 * $ad - a valid connection to Active Directory (returned by ldap_connect)

 * $sr - a search result (returned by ldap_search)

 * $key- an attribute name to be used as the key in the resulting array

 * Returns 2-d array as the following:

 *   return_value["keyfieldvalue"]["attributename"] = "attribute value"; // entries with key filed present

 *  return_value[i]["attributename"] = "attribute value"; // entries with key fields missing

 */

function ldap_flatresults($ad,$sr,$key=false) {

  for ($entry=ldap_first_entry($ad,$sr);

            $entry!=false; 

            $entry=ldap_next_entry($ad,$entry)) {

    $user = array();

    $attributes = ldap_get_attributes($ad,$entry);

    for($i=$attributes['count'];$i-- >0;) {

          $user[strtolower($attributes[$i])] = $attributes[$attributes[$i]][0];

    }

    if( $key && $user[$key] )

      $users[strtolower($user[$key])] = $user;

    else 

      $users[] = $user;

  }

  return $users;

}

?>

rtdees at gapac dot com
09-Oct-2009 08:13


As of today, I have found for me that ldap_search and ldap_list are reversed in functionality.  ldap_list now searches the subtree and ldap_search does not.  This is witnessed when searching against an AD forest running on Windows 2008 in what I believe is 2003 mode.

john dot saterfiel at act dot org
29-Sep-2009 05:10


Here's an example of how to connect to an active directory (2003 windows ad tested). And retrieve a specific person's information when given only their username (sAMAccountName).  Note: I have noticed that some active directory servers do care about what case the attributes are in and others don't.  This site was very useful in looking up the AD attributes but I did have to lowercase them all to work for me. 

Do a google search on "active directory person attributes" to find the site. www.computerperformance.co.uk



I doubt the code below will work for everybody as is but it should give ad users a good start in how to get a logged in user's data without knowing what organization or security group they're in.  This was needed because my company didn't put all their users in the same organization.



<?PHP

$ldap_url = 'examplead.mycomp.com';

$ldap_domain = 'mycomp.com';

$ldap_dn = "dc=mycomp,dc=com";



$ds = ldap_connect( $ldap_url );

ldap_set_option($ds, LDAP_OPT_PROTOCOL_VERSION, 3);

ldap_set_option($ds, LDAP_OPT_REFERRALS, 0);



$username = "your_user_name_here";

//must always check that password length > 0

$password = "your_password_here"; 



// now try a real login

$login = ldap_bind( $ds, "$username@$ldap_domain", $password ); 

echo '- Logged In Successfully<br/><br/>';

try{

$attributes = array("displayname", "mail",

"department",

"title",

"physicaldeliveryofficename",

"manager");

$filter = "(&(objectCategory=person)(sAMAccountName=$username))";



$result = ldap_search($ds, $ldap_dn, $filter, $attributes);



$entries = ldap_get_entries($ds, $result);



if($entries["count"] > 0){

//echo print_r($entries[$i],1)."<br />";

echo "<b>User Information:</b><br/>";

echo "displayName: ".$entries[0]['displayname'][0]."<br/>";

echo "email: ".$entries[0]['mail'][0]."<br/>";

echo "department: ".$entries[0]['department'][0]."<br/>";

echo "title: ".$entries[0]['title'][0]."<br/>";

echo "office: ".$entries[0]['physicaldeliveryofficename'][0]."<br/>";

//echo "manager: ".$entries[$i]['manager'][0]."<br/>";

$manager_result = ldap_search($ds,

$entries[0]['manager'][0],

'(objectCategory=person)',

array("displayname"));



$manager_entries = ldap_get_entries($ds, $manager_result);

if($manager_entries["count"] > 0){

echo "manager: ". $manager_entries[0]['displayname'][0];

}

}

}catch(Exception $e){

ldap_unbind($ds);

return;

}

ldap_unbind($ds);

echo '<br/><br/>- Logged Out';

?>

douglass_davis at earthlink dot net
08-Apr-2009 01:01


A better ldap_escape, if you don't need nested filters such as those in the Pear package.  Escapes for both filters and distinguished names.





<?php


function ldap_escape($str, $for_dn = false)


{


    


    // see: 


    // RFC2254


    // http://msdn.microsoft.com/en-us/library/ms675768(VS.85).aspx


    // http://www-03.ibm.com/systems/i/software/ldap/underdn.html        


        


    if  ($for_dn)


        $metaChars = array(',','=', '+', '<','>',';', '\\', '"', '#');


    else


        $metaChars = array('*', '(', ')', '\\', chr(0));





    $quotedMetaChars = array();


    foreach ($metaChars as $key => $value) $quotedMetaChars[$key] = '\\'.str_pad(dechex(ord($value)), 2, '0');


    $str=str_replace($metaChars,$quotedMetaChars,$str); //replace them


    return ($str);


}


?>

beni at php dot net
27-Aug-2008 09:17


Please note, that your example is not fully implementing filter escaping needs and is thus not safe for every case (see RFC 2254).



Filter stuff is also available in pears Net_LDAP: http://pear.php.net/manual/en/package.networking.net-ldap.filter.php



With this class you can easily create nested filters without worrying for escaping issues (those are handled by the class itnernally in a rfc compatible maner).

metala at metala dot org
11-Jun-2008 09:12


// Escape string

// see: RFC2254

function ldap_escape($str){

    $metaChars = array('\\', '(', ')', '#', '*');

    $quotedMetaChars = array();

    foreach ($metaChars as $key => $value) $quotedMetaChars[$key] = '\\'.dechex(ord($value));

    $str=str_replace($metaChars,$quotedMetaChars,$str); //replace them

    return ($str);

}

chrisbloom7 at gmail dot com
08-Aug-2007 08:18


Here are a couple of resources for proper construction of filters. 



http://msdn2.microsoft.com/En-US/library/aa746475.aspx



http://technet.microsoft.com/en-us/library/aa996205.aspx



Before finding these I had been stumped for hours on how to do something like "all users starting with "a" except those from OU 'foo'"

beni at php dot net
26-Jun-2007 06:56


LDAP stuff is very nicely capsulated in the object oriented Net_LDAP class provided by PEAR:

http://pear.php.net/package/net_ldap

lifo at liche dot net
23-May-2007 06:39


When I discovered I couldn't get searches to work with complex strings (in my case searching on displayName which can have parens and slashes in it). I made this quick function to quote ldap strings in accordance with the RFC. Except I encode spaces as well since searching wouldn't work with spaces. Note, technically speaking a search filter can be encoded into the \xx format for all characters but then filters wouldn't be human readable.



I'm somewhat surprised there wasn't a built in ldap_quote() type of function already.

<?php

// see: RFC2254

function ldap_quote($str) {

        return str_replace(

                array( '\\', ' ', '*', '(', ')' ),

                array( '\\5c', '\\20', '\\2a', '\\28', '\\29' ),

                $str

        );

}

?>

Allie
06-Mar-2007 10:38


I just posted on the ldap_bind, but I figured it couldn't hurt here since this was the first place I stopped when trying to figure out my problem.  My error pointed to ldap_search, but specifying the ldap_connect port was the fix.



When you want to search the entire directory for MS AD, you must specify port 3268 in your bind.  This is also true for apache auth_ldap.



 $ldapserver = ldap_connect($server,3268);

Alain SCHNERB
05-Mar-2007 01:44


I had problem searching into Microsoft Active Directory

with ldap_search.



System administrator does not want to change the 1.000 limit

of returned result because of Domain Controler performance.



Here is a example of code that activates the Page Mode.



See "searching with ActiveX Data Objects (ADO)" on MSDN

for more details.



$connection = New COM("ADODB.Connection");

$commande = New COM("ADODB.Command");

$resultat = New COM("ADODB.Recordset");

$connection->Provider = "ADsDSOObject";

$connection->Open();

$commande->ActiveConnection = $connection ;

$commande->Properties["Cache results"] = false;



// ACTIVATE PAGE MODE

$commande->Properties["Page size"] = 1000;



$recherche1 = "<LDAP://OU=XXXX,OU=Ressources_Locales,DC=COMMUN,

DC=AD,DC=YYYY,DC=FR>";

$recherche2 = ";(&(objectCategory=group)

(sIDHistory=*));distinguishedname;subtree";



$commande->commandtext = $recherche1.$recherche2;

$resultat = $commande->Execute();



$count = 0;

while (!$resultat->eof())

    {

    if ($count<10)

        echo $resultat["distinguishedname"]."<br>";        

    $resultat->MoveNext();

    $count = $count +1;

    }

echo $count."<br>";

cbrinker at contronicssolutions dot com
23-Jan-2007 10:18


I was completely lost trying to setup LDAP access with a Windows Server 2003 environment, but I finally got it to work. Here's a lifesaving tip:



-Script/web server cannot be located on the Active Directory server that you are querying



As well, here's the sample code I used:



<?php

    //This code cannot be executed on the same server as AD is installed on!!!

    

    //Connect

    $ad = ldap_connect("ad server");

    

    //Set some variables

    ldap_set_option($ad, LDAP_OPT_PROTOCOL_VERSION, 3);

    ldap_set_option($ad, LDAP_OPT_REFERRALS, 0);

    

    //Bind to the ldap directory

    $bd = ldap_bind($ad,"user@domain.com","password")

        or die("Couldn't bind to AD!");



    //Search the directory

    $result = ldap_search($ad, "OU=orginizational unit,DC=domain,DC=com", "(CN=*)");



    //Create result set

    $entries = ldap_get_entries($ad, $result);

    

    //Sort and print

    echo "User count: " . $entries["count"] . "<br /><br /><b>Users:</b><br />";



    for ($i=0; $i < $entries["count"]; $i++)

    {

        echo $entries[$i]["displayname"][0]."<br />";

    }



    //never forget to unbind!

    ldap_unbind($ad);

?>

buhreen at shaw dot ca
03-Apr-2006 04:12


If you are just trying to run LDAP searches against Active Directory, you might find it easier to use the COM objects and use the ADSI ldap search function.  This allows you to use SQL based LDAP queries.  It also allows you to perform subtree level searches in AD.



Here is a quick example.



<?php



$Conn = New COM("ADODB.Connection");

$RS = New COM("ADODB.Recordset");



$Conn->Provider = "ADsDSOObject";

$Conn->Properties['User ID'] = "CN=ZimZam,CN=Users,DC=corp,DC=ad,DC=bob,DC=prv";

$Conn->Properties['Password'] = "anythingyouwant";

$strConn = "Active Directory Provider";

$Conn->Open($strConn);



$strRS = "Select givenname,sn,displayName,mail,SAMAccountName from 'LDAP://corp.ad.bob.prv/DC=corp,DC=ad,DC=bob,DC=prv' where objectClass='user' and SAMAccountName='abc123';



$RS->Open($strRS, $Conn, 1, 1);

echo $RS['givenname'] ." - ". $RS['sn'] ." - ". $RS['displayName'] ." - ". $RS['mail'] ." - ".  $RS['SAMAccountName'] ."<br>";



$RS->Close;

$Conn->Close;

?>

27-Jan-2006 11:53


HOWTO list LDAP users.



This CODE list one user from LDAP tree, but I' like list all user from LDAP one ou=Organization



<?php



$ldaprdn = 'cn=user,dc=domain,dc=org'; 

$ldappass = 'password';

$sdn = 'cn=user,ou=group,dc=domain,dc=org';



$ldapconn = ldap_connect("ldap://localhost", 389) 

or die("Not connect: $ldaphost ");



if ($ldapconn) {



// binding to ldap server

$ldapbind = ldap_bind($ldapconn, $ldaprdn, $ldappass);



// verify binding

if ($ldapbind) {

$filter="uid=*"; 

$justthese = array("uid"); 



$sr=ldap_read($ldapconn, $srdn, $filter, $justthese);

$entry = ldap_get_entries($ldapconn, $sr);



} else {

echo "LDAP conn ok...";

}



}



ldap_close($ldapconn);



?> 

<?php

echo $entry[0]["mail"][0] . " mail adress ";

echo $entry[0]["sn"][0] . " Name ";

?>

cruzfern at chuchuwa dot com dot ar
30-Aug-2005 04:14


The internal attributes (like createTimestamp, modifyTimestamp, etc), don't come by default (when the optional parameter attributes is not set). You have to specify it:



<?

$r=ldap_search($ds,$base,$filter,array("createTimestamp"));

?>

fmouse at fmp dot com
01-Mar-2005 06:53


It appears that the Netscape Directory SDK (developer.netscape.com) referenced for LDAP filter information is no longer accepting connections.   The A copy of RFC 2254 which defines the standard for string representations of LDAP filters can be found  at http://www.ietf.org/rfc/rfc2254.txt

openldap at mail dot doris dot cc
11-Feb-2005 03:54


PHP 4.3.10



I was trying to do an ldapsearch without a basedn.  First, I tried with ' ', as suggested above, but it gave me invalid dn syntax error. 



ie: 

$sr=ldap_search($ds, ' ', $filter);

Warning: ldap_search(): Search: Invalid DN syntax in ...



Then I changed it to

$sr=ldap_search($ds, "", $filter);



Which gave me the following error:

Warning: ldap_search(): Search: No such object in ...



With that I then modified my ldap.conf file and commented out the BASE field

#BASE   dc=example, dc=com



Then it worked!



So it looks like if you supply a blank basedn, then it will use your default basedn in ldap.conf.

rsu_friend at yahoo dot com
11-Feb-2005 09:03


I was doing a ldap_search with

$searchbasedn = "miDomainName=" . $_SESSION['selectDomain'] ."," . LDAP_DOMAINBASE;

$filter = "(&(mpsAccountNumber=". $acctNumber .")(objectclass=mpsAccountDetails))";    

$attributes = array("mpsparentchild");



 $sr = ldap_search($ldapconn, $searchbasedn, $filter,$attributes);  



For some reasone this search was failing

but I was able to do successful search only when I gave the search filter as

$filter = "(&(mpsAccountNumber= $acctNumber )(objectclass=mpsAccountDetails))";    



I did not get why the ldap_search was not able to search in the first case.

sema at technion dot ac dot il
04-Sep-2004 05:54


In order to perform the searches on Windows 2003 Server Active Directory you have to set the LDAP_OPT_REFERRALS option to 0:



ldap_set_option($ldap, LDAP_OPT_REFERRALS, 0);



Without this, you will get "Operations error" if you try to search the whole AD schema (using root of the domain as a $base_dn).



As opposed to Windows 2000 Server, where this option was optional and only increased the performance.

chester at the dot underground dot com dot au
20-Nov-2003 09:45


If you are searching active directory and are experiencing lag or time outs, it may be that you are being given ldap referrals from the ldap server. The following code will disable this.



<?

ldap_set_option($connect, LDAP_OPT_REFERRALS, 0);

?>

sembiance at cosmicrealms dot com
17-Nov-2003 02:15


When searching for BINARY data (such as an Active Directory objectGUID) you need to escape each hexadecimal character with a backslash.



The following command line run of ldapsearch shows:

ldapsearch -b "dc=blahblah,dc=com" "(objectGUID=\AE\C3\23\35\F7)"



In PHP, you need to escape the escape for the backslash:

ldap_search($ds,"dc=blahblah,dc=com", "(objectGUID=\\AE\\C3\\23\\35\\F7)");

francis dot tyers at hp dot com
10-Nov-2003 03:53


it seems that all fields must be used in lower case even if they are mixed case in the ldapsearch output.



example:



gidNumber: 1010

homeDirectory: /home/dnt



must be:



echo "gid: " . $info[$i]["gidnumber"][0] . "<br>";

echo "home directory: ". $info[$i]["homedirectory"][0] ."<br>";



not ( $info[$i]["homeDirectory"][0] ) etc.

nicolas at atanis dot net
19-Aug-2003 06:17


Here is a little script that make a complete subtree search ( i know a script above seems do that but it doesnt work fine)

This is my version:



Voila ce que j'ai fait aujourd'hui ...



      $ldap_host = "192.168.0.50";

    $ldap_port = "389";

    $base_dn = "dc=fr";

    $filter = "(cn=*)";

    $ldap_user ="cn=admin,dc=fr";

    $ldap_pass = "hellodelu";

    $connect = ldap_connect( $ldap_host, $ldap_port);

    ldap_set_option($connect, LDAP_OPT_PROTOCOL_VERSION, 3);



    $bind = ldap_bind($connect, $ldap_user, $ldap_pass);

    $read = ldap_search($connect, $base_dn, $filter);

    

    $info = ldap_get_entries($connect, $read); 

    echo $info["count"]." entrees retournees<BR><BR>"; 

    for($ligne = 0; $ligne<$info["count"]; $ligne++)

    {

        for($colonne = 0; $colonne<$info[$ligne]["count"]; $colonne++)

        {

            $data = $info[$ligne][$colonne];

            echo $data.":".$info[$ligne][$data][0]."<BR>";

        }

        echo "<BR>";

    }

ldap_close($connect);



--------

nicolas

me at gavinadams dot org
15-Aug-2003 08:38


Minor clarification on AD LDAP searchs. Small typo in previous example, and does not display multiple values per attribute. Here's the for loop to enumerate all entries, attributes, and values:



$bind = ldap_bind($connect) // asume anon connect or add user/pass

     or exit(">>Could not bind to $ldap_host<<");

$read = ldap_search($connect, $base_dn, $filter)

     or exit(">>Unable to search ldap server<<");

$info = ldap_get_entries($connect, $read);

echo $info["count"]." entries returned<br>";

// $i = entries

// $ii = attributes for entry

// $iii = values per attribute

for ($i = 0; $i<$info["count"]; $i++) {

  for ($ii=0; $ii<$info[$i]["count"]; $ii++){

     $data = $info[$i][$ii];

     for ($iii=0; $iii<$info[$i][$data]["count"]; $iii++) {

       echo $data.":&nbsp;&nbsp;".$info[$i][$data][$iii]."<br>";

     }

  }

echo "<p>"; // separate entries

php @ fccfurn dot com
11-Apr-2003 10:35


To do subtree search from top DN in Active Directory, Make sure you do your ldap_set_option().



<?php

$ldap_host = "pdc.php.net";

$base_dn = "DC=php,DC=net";

$filter = "(cn=Joe User)";

$ldap_user  = "CN=Joe User,OU=Sales,DC=php,DC=net";

$ldap_pass = "pass";

$connect = ldap_connect( $ldap_host, $ldap_port)

         or exit(">>Could not connect to LDAP server<<");

ldap_set_option($connect, LDAP_OPT_PROTOCOL_VERSION, 3);

ldap_set_option($connect, LDAP_OPT_REFERRALS, 0);

$bind = ldap_bind($connect, $ldap_user, $ldap_pass)

      or exit(">>Could not bind to $ldap_host<<");

$read = ldap_search($connect, $base_dn, $filter)

      or exit(">>Unable to search ldap server<<");

$info = ldap_get_entries($connect, $read);

echo $info["count"]." entries returned<p>";

$ii=0;

for ($i=0; $ii<$info[$i]["count"]; $ii++){

    $data = $info[$i][$ii];

    echo $data.":&nbsp;&nbsp;".$info[$i][$data][0]."<br>";

}

ldap_close($connect);

?>

Kamil Kukura <kamk at nexen dot cz>
26-Feb-2003 05:20


When I tried to search with empty base DN on OpenLDAP server which had "" namingContext I got result "no such object". In the log file there was query for dn: dc=example,dc=com (!).

As a workaround, it seems it's enough to feed it with space (' ') as base DN - ldap_search($ds, ' ', '(...filter...)', ...

neumeyed at city dot bloomington dot in dot us
30-Jan-2003 12:50


A previous comment noted: "I've also noticed that the departmentNumber, employeeNumber (and maybe others in inetorgperson.schema) are not returned from a search."



This is incorrect. These attributes are returned, but you must reference them with lowercase names. That is, instead of doing this:



$entries[0]["departmentNumber"][0]



Do this:



$entries[0]["departmentnumber"][0]



This doesn't seem like "correct" behavior to me, but I don't know enough about LDAP to say for sure.

nick dot veitch at futurenet dot co dot
17-Jan-2003 04:59


It might be useful to list here the operators that work:



=         - matches exact value

=*xxx  - matches values ending xxx

=xxx*  - matches values beginning xxx

=*xxx* - matches values containing xxx

=*       - matches all values (if set - NULLS are not returned)



>=xxx  - matches everthing from xxx to end of directory

<=xxx  - matches everything up to xxx in directory



~=xxx      - matches similar entries (not all systems)



Boolean operators for constructing complex search



&(term1)(term2)  - matches term1 AND term2

| (term1)(term2)  - matches term1 OR term2

!(term1)                 - matches NOT term1

&(|(term1)(term2))(!(&(term1)(term2)) - matches XOR term1 term2



some of the more compelx constructions seem to work with varying  degrees of efficiency - sometimes it can be better to filter some of the results with the search and do further filtering in PHP.

emrecio at netscape dot net
01-Oct-2002 03:42


implode(", ",$uentry[0]["rfc822mailalias"]);



doesn't work as expected because "count" is in there... one /must/ use the 'for' loop to cycle through results (discarding "count" element).

jpdalbec at ysu dot edu
09-Sep-2002 02:33


I've found that spaces need to be escaped in search filters ("\20"), at least using the Red Hat PHP 4.1.2 package.  Otherwise no results are returned.

john_taylor_1973 at yahoo dot com
27-Jun-2002 09:26


Try to use ldap_list(), if possible.  It is much faster.  ldap_search searches a scope of LDAP_SCOPE_SUBTREE, but ldap_list searches a scope of just LDAP_SCOPE_ONELEVEL.  This made a big difference on Novell eDirectory 8.6.1, even for a query that only returned 130 objects.  Using an attribute list, the 4th function parameter (of either function), also made queries faster.

01-Sep-2001 02:13


I used the following to retrieve all entries from an ILS (Netmeeting) Server:<p>    $sr=ldap_search($ds, "objectclass=rtperson","(&(cn=%)(objectclass=rtperson))");


<p>Have fun!


<p>Kees

cdaveb at csua dot berkeley dot edu
03-Jan-2001 01:23


FYI, for those doing LDAP searches on Exchange servers, there seems to be some preference in Exchange to disallow searches that aren't initial searches (i.e. only x* will work, not * or *x). I'd been going nuts trying to figure out why I kept getting errors doing * searches.





More info at:


http://www.microsoft.com/Exchange/en/55/help/documents/server/XOG16007.HTM

aa529 at nospamchebucto dot ns dot ca
22-Nov-1999 09:27


Be careful of special characters when generating filters from user input.





*, (, ), \ and NUL should be backslash-escaped. See section 4 of RFC 2254 (I found it here:


http://www.cis.ohio-state.edu/htbin/rfc/rfc2254.html)

add a note

ldap_set_option

ldap_sasl_bind

Last updated: Fri, 06 Nov 2009