ini_get_all
This version of return_bytes takes care of the MB, GB, KB cases along with the M,G,K ones.
Hope this is helpful!
<?php
public static function return_bytes ($val)
{
if(empty($val))return 0;
$val = trim($val);
preg_match('#([0-9]+)[\s]*([a-z]+)#i', $val, $matches);
$last = '';
if(isset($matches[2])){
$last = $matches[2];
}
if(isset($matches[1])){
$val = (int) $matches[1];
}
switch (strtolower($last))
{
case 'g':
case 'gb':
$val *= 1024;
case 'm':
case 'mb':
$val *= 1024;
case 'k':
case 'kb':
$val *= 1024;
}
return (int) $val;
}
?>
ini_get
(PHP 4, PHP 5)
ini_get — Devuelve el valor de una directiva de configuración
Descripción
string ini_get
( string
$varname
)En caso de éxito devuelve el valor de una directiva de configuración.
Parámetros
-
varname -
Nombre de la directiva de configuración.
Valores devueltos
Devuelve el valor de la opción de configuración como cadena en caso de éxito, o
una cadena vacía para valores null. Devuelve FALSE si la
opción de configuración no existe.
Ejemplos
Ejemplo #1 Unos cuantos ejemplos de la función ini_get()
<?php
/*
Dentro del php.ini tenemos las siguientes directivas junto con sus valores iniciales:
display_errors = On
register_globals = Off
post_max_size = 8M
*/
echo 'display_errors = ' . ini_get('display_errors') . "\n";
echo 'register_globals = ' . ini_get('register_globals') . "\n";
echo 'post_max_size = ' . ini_get('post_max_size') . "\n";
echo 'post_max_size+1 = ' . (ini_get('post_max_size')+1) . "\n";
echo 'post_max_size in bytes = ' . return_bytes(ini_get('post_max_size'));
function return_bytes($val) {
$val = trim($val);
$last = strtolower($val[strlen($val)-1]);
switch($last) {
// El modificador 'G' está disponble desde PHP 5.1.0
case 'g':
$val *= 1024;
case 'm':
$val *= 1024;
case 'k':
$val *= 1024;
}
return $val;
}
?>
El resultado del ejemplo sería algo similar a:
display_errors = 1 register_globals = 0 post_max_size = 8M post_max_size+1 = 9 post_max_size in bytes = 8388608
Notas
Nota: Cuando se consultan valores booleanos
El valor booleano off será devuelto como una cadena vacía o "0", mientras que el valor booleano on será devuelto será devuelto como "1". Esta función también puede devolver valores iniciales como cadenas.
Nota: Cuando se consultan valores de tamaños de memoria
Muchos valores iniciales de tamaños de memoria, tales como upload_max_filesize, están almacenados en el archivo php.ini en notación abreviada. ini_get() devolverá la cadena exacta almacenada en el archivo php.ini, y NO su valor de tipo integer equivalente. Utilizar estos valores en funciones aritméticas puede provocar resultados inesperados. El ejemplo anterior muestra una manera de convertir la notación abreviada a bytes, muy similar a cómo lo hace el código fuente de PHP.
Ver también
- get_cfg_var() - Obtiene el valor de una opción de configuración de PHP
- ini_get_all() - Obtiene todas las opciones de configuración
- ini_restore() - Restablece el valor de una opción de configuración
- ini_set() - Establecer el valor de una directiva de configuración
add a note
User Contributed Notes
ini_get
Ivo Mandalski
15-Nov-2011 08:27
Stas Trefilov, OpteamIS
26-Mar-2010 10:08
another version of return_bytes which returns faster and does not use multiple multiplications (sorry:). even if it is resolved at compile time it is not a good practice;
no local variables are allocated;
the trim() is omitted (php already trimmed values when reading php.ini file);
strtolower() is replaced by second case which wins us one more function call for the price of doubling the number of cases to process (may slower the worst-case scenario when ariving to default: takes six comparisons instead of three comparisons and a function call);
cases are ordered by most frequent goes first (uppercase M-values being the default sizes);
specs say we must handle integer sizes so float values are converted to integers and 0.8G becomes 0;
'Gb', 'Mb', 'Kb' shorthand byte options are not implemented since are not in specs, see
http://www.php.net/manual/en/faq.using.php#faq.using.shorthandbytes
<?php
function return_bytes ($size_str)
{
switch (substr ($size_str, -1))
{
case 'M': case 'm': return (int)$size_str * 1048576;
case 'K': case 'k': return (int)$size_str * 1024;
case 'G': case 'g': return (int)$size_str * 1073741824;
default: return $size_str;
}
}
?>
nicolas dot grekas+php at gmail dot com
19-Aug-2009 10:51
Here is how to accurately test for boolean php.ini values:
<?php
function ini_get_bool($a)
{
$b = ini_get($a);
switch (strtolower($b))
{
case 'on':
case 'yes':
case 'true':
return 'assert.active' !== $a;
case 'stdout':
case 'stderr':
return 'display_errors' === $a;
default:
return (bool) (int) $b;
}
}
?>
Nathaniel Sabanski
15-Mar-2009 02:20
Here's a simplified version of return_bytes() that does not rely on non-breaking cases and variable variables.
<?php
function return_bytes($val)
{
$val = trim($val);
$last = strtolower(substr($val, -1));
if($last == 'g')
$val = $val*1024*1024*1024;
if($last == 'm')
$val = $val*1024*1024;
if($last == 'k')
$val = $val*1024;
return $val;
}
?>
peter
29-Jul-2008 02:25
The above example function called return_bytes() assumes that ini_get('upload_max_filesize') delivers only one letter at the end. As I've seen 'Mb' and things like that, I'd suggest to change the $last = ... part into $last = strtolower(substr($val,strlen($val/1),1)).
I'd call it $unit then.
filh at filh dot org
21-Nov-2005 06:24
Concerning the value retourned, it depends on how you set it.
I had the problem with horde-3 which test the safe_mode value.
THan :
- if you set the value with php_admin_value safe_mode Off (or On) ini_get returns the string
- if you set the value with php_admin_flag safe_mode Off (or On) ini_get returns the boolean.
31-Oct-2005 11:16
Important: The manual says that ini_get will return 0 or an empty string for boolean config values that are set to off in php.ini.
This is technically correct, however when you use
php_value register_globals off
in an .htaccess file, ini_get will return the string, which will "evaluate" to 1. So if you are using mod_php you have to check boolean config values against the strings (upper/lowercase etc.) anyhow or you will get wrong results.
david dot tulloh at infaze dot com dot au
21-Jun-2005 07:01
You can set custom entries in the ini file to provide globals such as database details.
However these must be retrieved with get_cfg_var, ini_get won't work.
Der Graph
16-Aug-2004 11:59
It might be useful for included scripts that include other files to extend the 'include_path' variable:
<?php ini_set('include_path',ini_get('include_path').':../includes:'); ?>
Sometimes, it may also be useful to store the current 'include_path' in a variable, overwrite it, include, and then restore the old 'include_path'.
fbeyer at <nospam>clickhand dot de
13-Aug-2002 07:29
If you want to test ini flags (eg. On/Off), I recommend to explicitly cast the value returned by ini_get() to boolean - it is cleaner as you only get true or false, not 0 or 1 or "" as described above.
<?php
$register_globals = (bool) ini_get('register_gobals');
?>
C fans may of course also cast it to (int) to play with 0 and 1 - that's also cleaner to print().